Hold-open system

Slimdrive EMD-F Electromechanical swing door drive for single leaf fire and smoke protection doors

  • Closing force with variable adjustment EN3-6
  • Opening and closing speed can be individually adjusted
  • Mechanical latching action when operated without current, and electrical latching action in regular operation, which accelerates the door shortly before the closed position
  • Low-energy function opens and closes the door with reduced speed, fulfilling the highest safety requirements
  • Servo function for motorized support when manually opening the door
  • Vestibule function controls the opening and closing of two consecutive doors (interlocking door system)
Show more
  • Obstacle detection detects obstacles through contact and stops the opening or closing process
  • Automatic reversing detects an obstacle and returns to the opening position
  • Push & Go function triggers the automatic drive components following light manual pressure on the door leaf
  • Drive can be used with roller guide rail or link arm
  • Smoke switch control unit can be connected, whose signal makes the door close automatically in the event of a fire
Contact us

Electromechanical swing door drive for single leaf fire and smoke protection doors

Application Areas

  • Fire and smoke protection doors
  • Hold-open systems with integrated hold-open function – country-specific specifications must be observed
  • Right and left single leaf single-action doors
  • Single-action doors up to 1400 mm leaf width or 230 kg weight
  • Interior and exterior doors with high access frequency
  • Door leaf installation and transom installation

Product specifications

Slimdrive EMD-F
Leaf weight (max.) 230 kg
Leaf width (min.-max.) 750 mm - 1400 mm
Reveal depth (max.) 400 mm
Door overlap (max.) 30 mm
Drive type Electromechanical
Opening angle (max.) 130 °
DIN left Yes
DIN right Yes
Installation in the door leaf No
Installation in the door frame No
Transom installation opposite hinge side with link arm Yes
Transom installation opposite hinge side with roller guide rail Yes
Transom installation hinge side with roller guide rail Yes
Door leaf installation opposite hinge side with roller guide rail No
Door leaf installation hinge side with roller guide rail Yes
Door leaf installation hinge side with link arm No
Mechanical latching action Yes
Electrical latching action Yes
Electrical closing sequence control No
Mechanical closing sequence control No
Disconnection from mains Cable plug connection
Activation delay (max.) 20 s
Operating voltage 230 V
Frequency of supply voltage 50 Hz
Power rating 230 W
Power supply for external devices 1000 mA
Operating temperature -15 °C - 50 °C
Air humidity non-condensing (max.) 95 %
IP rating IP20
Modes of operation Automatic, Permanently open, Night, Off, Shop closing
Automatic function Yes
Low-energy function Yes
Smart swing No
Servo function Yes
Inverse function (opening by spring force) No
Obstacle detection Yes
Automatic reversing Yes
Push & Go adjustable
Operation Programme switch integrated in the drive, Programme switch DPS, Programme switch MPS
Parameter setting ST 220 service terminal, Programme switch DPS, GEZEconnects (PC + Bluetooth)
CAN interface Optional
Approvals EN 16005, DIN 18650, DIN 18263-4
Suitability for fire protection doors Yes
Integrated smoke switch No

Downloads

Variants & Accessories

Contact

We would be happy to assist you +49-7152-203-0 Hotline for architects +49-7152-203-112 (7:30 a.m. - 5:00 p.m.) Service Hotline +49-1802-923392 (0.06 € / Calling from landline, mobile telephony max. 0.42 €)