67 Ergebnisse gefunden
Leistungserklärung für das Produkt Elektro-Haftmagnet Nr. 0024-CPR
… DECLARATION OF PERFORMANCE According to annex III to regulation (EU) No.305/2011 Construction Products Regulation for the product holding magnet No.0024-CPR 1. Type designation: 2. Type identification no.: 3. Intended use: 4. Manufacturer: 5. System of assessment of performance of the construction product: 6. Harmonized standard: 7. In the case of declaration of performance concerned to a construction product, which is included in a harmonized standard: GT050R001.01 GTR050.007007 Holding magnet in connection with an armature plate as an electrically powered hold open device for swing doors. Kendrion (Donaueschingen/Engelswies) GmbH Fred-Hahn-Straße 33 72514 Inzigkofen-Engelswies Germany System … EN 1155: 1997 + A1: 2002 The notified body VdS (0786) performed the determination of the product type on the basis of type testing, type calculation, tabulated values or descriptive documentation of the product. Vds also made the initial inspection of factory and of factory production control as well as continuous surveillance, assessment and evaluation of factory production control according to system … and issued following: Certificate of constancy of performance of the product: 0786-CPD-20249 8. Declared performance: Essential characteristic Classification Performance Harmonized specification EN 1155: 1997 + A1: 2002, … 1. 2. 3. 4. Electrical release Door closing device requirements Durability Angel of hold-open Manual release Continuous hold-open 10/07/2013 Application class: … within 3s of 10% Unom N.P.D. EN 1155: 1997 + A1: 2002, … N.P.D. N.P.D. after-run of the door <2° in 48h EN 1155: 1997 + A1: 2002, … .7 3/4 No.0024-CPR Overload performance Delayed release Electrical performance Temperature rise Damage Fire/smoke door suitability Corrosion resistance testing … times with rope and falling weights for certain hold-open power size N.P.D. performance requirement for continuous hold-open and delayed release with Unom±15% and manual release with Unom for Unom +15% - connected coils <55°C, terminals for external connections and external housings <25°C no damaging after test routine which affects the performance characteristics grade … .13 The performance of the product according to point 1. and 2. is in conformity with the declared performance of point 8. The declaration of performance is issued under the sole responsibility of the manufacturer according to point 4. Signed for and on behalf of the manufacturer by: 10/07/2013 4/4 No.0024-CPR
(PDF | 300 KB)
Leistungserklärung Elektro-Haftmagnet Nr.0086-CP
… DECLARATION OF PERFORMANCE According to annex III to regulation (EU) No.305/2011 Construction Products Regulation for the product holding magnet No.0086-CPR 1. Type designation: 2. Type identification no.: 3. Intended use: 4. Manufacturer: 5. System of assessment of performance of the construction product: 6. Harmonized standard: 7. In the case of declaration of performance concerned to a construction product, which is included in a harmonized standard: GT050R153.01 GTR050.750011 Holding magnet in connection with an armature plate as an electrically powered hold open device for swing doors. Kendrion (Donaueschingen/Engelswies) GmbH Fred-Hahn-Straße 33 72514 Inzigkofen-Engelswies Germany System … EN 1155: 1997 + A1: 2002 The notified body VdS (0786) performed the determination of the product type on the basis of type testing, type calculation, tabulated values or descriptive documentation of the product. Vds also made the initial inspection of factory and of factory production control as well as continuous surveillance, assessment and evaluation of factory production control according to system … and issued following: Certificate of constancy of performance of the product: 0786-CPD-20249 8. Declared performance: Essential characteristic Classification Performance Harmonized specification EN 1155: 1997 + A1: 2002, … 1. 2. 3. 4. Electrical release Door closing device requirements Durability Angel of hold-open Manual release Continuous hold-open 10/07/2013 Application class: … within 3s of 10% Unom N.P.D. EN 1155: 1997 + A1: 2002, … N.P.D. N.P.D. after-run of the door <2° in 48h EN 1155: 1997 + A1: 2002, … .7 3/4 No.0086-CPR Overload performance Delayed release Electrical performance Temperature rise Damage Fire/smoke door suitability Corrosion resistance testing … times with rope and falling weights for certain hold-open power size N.P.D. performance requirement for continuous hold-open and delayed release with Unom±15% and manual release with Unom for Unom +15% - connected coils <55°C, terminals for external connections and external housings <25°C no damaging after test routine which affects the performance characteristics grade … .13 The performance of the product according to point 1. and 2. is in conformity with the declared performance of point 8. The declaration of performance is issued under the sole responsibility of the manufacturer according to point 4. Signed for and on behalf of the manufacturer by: 10/07/2013 4/4 No.0086-CPR
(PDF | 300 KB)
Leistungserklärung für Elektro-Haftmagnet Nr. 0040-CPR
… DECLARATION OF PERFORMANCE According to annex III to regulation (EU) No.305/2011 Construction Products Regulation for the product holding magnet No.0040-CPR 1. Type designation: 2. Type identification no.: 3. Intended use: 4. Manufacturer: 5. System of assessment of performance of the construction product: 6. Harmonized standard: 7. In the case of declaration of performance concerned to a construction product, which is included in a harmonized standard: GT050R020.01 GTR050.500102 Holding magnet in connection with an armature plate as an electrically powered hold open device for swing doors. Kendrion (Donaueschingen/Engelswies) GmbH Fred-Hahn-Straße 33 72514 Inzigkofen-Engelswies Germany System … EN 1155: 1997 + A1: 2002 The notified body VdS (0786) performed the determination of the product type on the basis of type testing, type calculation, tabulated values or descriptive documentation of the product. Vds also made the initial inspection of factory and of factory production control as well as continuous surveillance, assessment and evaluation of factory production control according to system … and issued following: Certificate of constancy of performance of the product: 0786-CPD-20249 8. Declared performance: Essential characteristic Classification Performance Harmonized specification EN 1155: 1997 + A1: 2002, … 1. 2. 3. 4. Electrical release Door closing device requirements Durability Angel of hold-open Manual release Continuous hold-open 10/07/2013 Application class: … within 3s of 10% Unom N.P.D. EN 1155: 1997 + A1: 2002, … N.P.D. N.P.D. after-run of the door <2° in 48h EN 1155: 1997 + A1: 2002, … .7 3/4 No.0040-CPR Overload performance Delayed release Electrical performance Temperature rise Damage Fire/smoke door suitability Corrosion resistance testing … times with rope and falling weights for certain hold-open power size N.P.D. performance requirement for continuous hold-open and delayed release with Unom±15% and manual release with Unom for Unom +15% - connected coils <55°C, terminals for external connections and external housings <25°C no damaging after test routine which affects the performance characteristics grade … .13 The performance of the product according to point 1. and 2. is in conformity with the declared performance of point 8. The declaration of performance is issued under the sole responsibility of the manufacturer according to point 4. Signed for and on behalf of the manufacturer by: 10/07/2013 4/4 No.0040-CPR
(PDF | 300 KB)
MCRdrive
… of Performance Number 24-001673-PR03 (NW-D02-02-en-01) Owner GEZE GmbH Reinhold-Vöster-Str. 21-29 71229 Leonberg Germany Product Power operated automatic door one-leaf door Designation System: GEZE Details Manufacturer Basis *) EN 16361-2013 + A1:2016-07 EN 14351-2:2018-11 *) and corresponding national versions (e.g. DIN EN) Test report: 24-001673-PR03 PBD02-02-de-01 Representation MCRdrive Profilsystem Shipping name: GEZE MCRdrive GEZE GmbH, - Leonberg; Aluminum and stainless steel; Opening direction Sliding door, to the left; Overall dimensions (W x H) 2,730 mm x 2,595 mm; Hardware GEZE GmbH; Infill LSG 12 mm, 0,76 SC out of … mm, Co. Schwabenglas Glazed door Variant 1: without reinforcing Variant 2: with reinforcing Material Special features Instructions for use The results obtained can be used by the manufacturer for preparing the Declaration of Performance in accordance with the Construction Products Regulation 305/2011/EU. The provisions of the applicable product standard have to be observed. Result Validity Air permeability according to EN 16361:2013+A1:2016 Variant … Class: D Class: D There is no time limit. When using this document the upto-dateness of above basis and the conformity of the product have to be observed. Notes on publication The ift-Guidance Sheet "Conditions and Guidance for the Use of ift Test Documents" applies. The cover sheet can be used as abstract. Ve-PB1-4902-en/ ( … .2024 Thomas Stefan, Dipl.-Ing. (FH) Head of Testing Department Building Component Testing Daniel Gromotka, B.Eng. Operating Testing Officer Building Component Testing Identity-Check www.ift-rosenheim.de/ift-geprueft ID: 239-237B6
(PDF | 324 KB)
MCRdrive
… of Performance Number 24-001673-PR01 (NW-D02-02-en-01) Owner GEZE GmbH Reinhold-Vöster-Str. 21-29 71229 Leonberg Germany Product Power operated automatic door one-leaf door Designation System: GEZE Details Manufacturer Basis *) EN 16361-2013 + A1:2016-07 EN 14351-2:2018-11 *) and corresponding national versions (e.g. DIN EN) Test report: 24-001673-PR01 PBD02-02-de-01 Representation MCRdrive Profilsystem Shipping name: GEZE MCRdrive GEZE GmbH, - Leonberg; Aluminum and stainless steel; Opening direction Sliding door, to the left; Overall dimensions (W x H) 2,730 mm x 2,595 mm; Hardware GEZE GmbH; Infill Fully paneled stainless steel door leaf with PU foam core, Co. Ermeling Stainless steel door Variant 1: without magnetic lock Variant 2: with magnetic lock Material Special features Instructions for use The results obtained can be used by the manufacturer for preparing the Declaration of Performance in accordance with the Construction Products Regulation 305/2011/EU. The provisions of the applicable product standard have to be observed. Result Validity Air permeability according to EN 16361:2013+A1:2016 Variant … Class: D Class: D There is no time limit. When using this document the upto-dateness of above basis and the conformity of the product have to be observed. Notes on publication The ift-Guidance Sheet "Conditions and Guidance for the Use of ift Test Documents" applies. The cover sheet can be used as abstract. Ve-PB1-4902-en/ ( … .2024 Thomas Stefan, Dipl.-Ing. (FH) Head of Testing Department Building Component Testing Daniel Gromotka, B.Eng. Operating Testing Officer Building Component Testing Identity-Check www.ift-rosenheim.de/ift-geprueft ID: C12-F7C95
(PDF | 321 KB)
Leistungserklärung (DoP): Schließfolgeregelung IS für den Drehflügelantrieb HDO 200 IS und HDO 200 R F IS
… declaration of performance GBR Copy of the original document 1of1 No. of the declaration of performance 1216_01 Product type identification code Intended use Schließfolgeregelung IS für den Drehflügelantrieb HDO 200 IS und HDO 200 R F IS 1216_01 Closing sequence controller for use on fire and smoke protection doors Manufacturer GEZE GmbH, Reinhold-Vöster-Str. 21-29, 71229 Leonberg, Germany System/s of AVCP … Harmonised standard EN 1158:1997/A1:2002/AC:2006 Notified body MPA Stuttgart, Pfaffenwaldring 32, D-70569 Stuttgart, Germany, Notified Body ID = 0672 Declared performance Permanent function of self-closing Essential Characteristics fulfilled - EN 1158:1997/A1:2002/AC:2006 sections … Hazardous substances fulfilled - EN 1158:1997/A1:2002/AC:2006 section ZA.3 Self-closing The performance of the above product is in conformity with the declared performance(s). The manufacturer above is solely responsible for preparing the declaration of performance in accordance with Regulation (EU) No. 305/2011. Signed for and on behalf of the manufacturer Leonberg, … .2024 See original document for signature Sandra Alber (Chief Officer Legal & Finance) Tomislav Jagar (Chief Officer Product Strategy & Sales) Dichiarazione di performance ITA Copia del documento originale 1di1 N. della dichiarazione di performance 1216_01 Codice di codifica del tipo di prodotto Destinazione d’uso Schließfolgeregelung IS für den Drehflügelantrieb HDO 200 IS und HDO 200 R F IS 1216_01 Regolatore della sequenza di chiusura per l'utilizzo su porte tagliafuoco e tagliafumo Produttore GEZE GmbH, Reinhold-Vöster-Str. 21-29, 71229 Leonberg, Germany Sistema per valutare la potenzialità … Sostanze pericolose soddisfatta - EN 1158:1997/A1:2002/AC:2006 Paragrafo ZA.3 A chiusura automatica La performance di questo prodotto soddisfa le prestazioni dichiarate. Per la redazione di una dichiarazione di performance conforme al regolamento (UE) n. 305/2011, unico responsabile è il produttore sopra menzionato. Firmato per il produttore e a nome del produttore Leonberg, … .2024 Allkirja leiate originaaldokumendist Sandra Alber (Chief Officer Legal & Finance) Tomislav Jagar (Chief Officer Product Strategy & Sales) Déclaration des performances FRA Copie du document original 1sur1 N° de la déclaration de performance 1216_01 Code d’identification du type de produit Utilisation conforme aux dispositions Schließfolgeregelung IS für den Drehflügelantrieb HDO 200 IS und HDO 200 R F IS 1216_01 Sélecteur de fermeture pour utilisation sur porte coupe-feu et pare-flammes Fabricant GEZE GmbH, Reinhold-Vöster-Str. 21-29, 71229 Leonberg, Germany Système pour l'évaluation des performances … Norme harmonisée EN 1158:1997/A1:2002/AC:2006 Autorité notifiante MPA Stuttgart, Pfaffenwaldring 32, D-70569 Stuttgart, Germany, Notified Body ID = 0672 Performances déclarées Principales caractéristiques constatées conforme à - EN 1158:1997/A1:2002/AC:2006 sections … Fermeture automatique Fonctionnement continu de la fermeture automatique Substances dangereuses conforme à - EN 1158:1997/A1:2002/AC:2006 section ZA.3 La puissance du produit correspond à la performance définie/aux performances définies. Le fabricant mentionné ci-dessus est seul responsable pour l’établissement de la déclaration de performance conformément à la directive (UE) n° 305/2011. Signé pour et au nom du fabricant Leonberg, … .2024 Għall-firma, ara d-dokument oriġinali Sandra Alber (Chief Officer Legal & Finance) Tomislav Jagar (Chief Officer Product Strategy & Sales) Prestatieverklaring NLD Kopie van origineel document 1van1 Nr. van de declaration of performance 1216_01 Identificatiecode van het producttype Beoogd gebruik Schließfolgeregelung IS für den Drehflügelantrieb HDO 200 IS und HDO 200 R F IS 1216_01 Sluitvolgorderegeling voor het gebruik op brand-/rookwerende deuren Fabrikant GEZE GmbH, Reinhold-Vöster-Str. 21-29, 71229 Leonberg, Germany Prestatie beoordelingssysteem … Gevaarlijke substanties voldoet aan - EN 1158:1997/A1:2002/AC:2006 paragraaf ZA.3 Zelfsluitend De prestatie van het bovenstaande product komt overeen met de verklaarde prestatie/prestaties. Voor het opstellen van de declaration of performance in overeenstemming met de verordening (EU) nr. 305/2011 is alleen bovengenoemde fabrikant verantwoordelijk. Ondertekend voor de fabrikant en namens de fabrikant Leonberg,
(PDF | 12 MB)
Leistungserklärung (DoP): Schließfolgeregelung IS für den Drehflügelantrieb HDO 300 IS und HDO 300 R F IS
… declaration of performance GBR Copy of the original document 1of1 No. of the declaration of performance 1217_01 Product type identification code Intended use Schließfolgeregelung IS für den Drehflügelantrieb HDO 300 IS und HDO 300 R F IS 1217_01 Closing sequence controller for use on fire and smoke protection doors Manufacturer GEZE GmbH, Reinhold-Vöster-Str. 21-29, 71229 Leonberg, Germany System/s of AVCP … Harmonised standard EN 1158:1997/A1:2002/AC:2006 Notified body MPA NRW, Marsbruchstraße 186, 44287 Dortmund, Germany, Notified Body ID = 0432 Declared performance Permanent function of self-closing Essential Characteristics fulfilled - EN 1158:1997/A1:2002/AC:2006 sections … Hazardous substances fulfilled - EN 1158:1997/A1:2002/AC:2006 section ZA.3 Self-closing The performance of the above product is in conformity with the declared performance(s). The manufacturer above is solely responsible for preparing the declaration of performance in accordance with Regulation (EU) No. 305/2011. Signed for and on behalf of the manufacturer Leonberg, … .2025 Katso allekirjoitus alkuperäisestä asiakirjasta Sandra Alber (Chief Officer Legal & Finance) Tomislav Jagar (Chief Officer Product Strategy & Sales) Déclaration des performances FRA Copie du document original 1sur1 N° de la déclaration de performance 1217_01 Code d’identification du type de produit Utilisation conforme aux dispositions Schließfolgeregelung IS für den Drehflügelantrieb HDO 300 IS und HDO 300 R F IS 1217_01 Sélecteur de fermeture pour utilisation sur porte coupe-feu et pare-flammes Fabricant GEZE GmbH, Reinhold-Vöster-Str. 21-29, 71229 Leonberg, Germany Système pour l'évaluation des performances … Norme harmonisée EN 1158:1997/A1:2002/AC:2006 Autorité notifiante MPA NRW, Marsbruchstraße 186, 44287 Dortmund, Germany, Notified Body ID = 0432 Performances déclarées Principales caractéristiques constatées conforme à - EN 1158:1997/A1:2002/AC:2006 sections … Fermeture automatique Fonctionnement continu de la fermeture automatique Substances dangereuses conforme à - EN 1158:1997/A1:2002/AC:2006 section ZA.3 La puissance du produit correspond à la performance définie/aux performances définies. Le fabricant mentionné ci-dessus est seul responsable pour l’établissement de la déclaration de performance conformément à la directive (UE) n° 305/2011. Signé pour et au nom du fabricant Leonberg, … .2025 Síniú féach an doiciméad bunaidh Sandra Alber (Chief Officer Legal & Finance) Tomislav Jagar (Chief Officer Product Strategy & Sales) Dichiarazione di performance ITA Copia del documento originale 1di1 N. della dichiarazione di performance 1217_01 Codice di codifica del tipo di prodotto Destinazione d’uso Schließfolgeregelung IS für den Drehflügelantrieb HDO 300 IS und HDO 300 R F IS 1217_01 Regolatore della sequenza di chiusura per l'utilizzo su porte tagliafuoco e tagliafumo Produttore GEZE GmbH, Reinhold-Vöster-Str. 21-29, 71229 Leonberg, Germany Sistema per valutare la potenzialità … Sostanze pericolose soddisfatta - EN 1158:1997/A1:2002/AC:2006 Paragrafo ZA.3 A chiusura automatica La performance di questo prodotto soddisfa le prestazioni dichiarate. Per la redazione di una dichiarazione di performance conforme al regolamento (UE) n. 305/2011, unico responsabile è il produttore sopra menzionato. Firmato per il produttore e a nome del produttore Leonberg, … .2025 Għall-firma, ara d-dokument oriġinali Sandra Alber (Chief Officer Legal & Finance) Tomislav Jagar (Chief Officer Product Strategy & Sales) Prestatieverklaring NLD Kopie van origineel document 1van1 Nr. van de declaration of performance 1217_01 Identificatiecode van het producttype Beoogd gebruik Schließfolgeregelung IS für den Drehflügelantrieb HDO 300 IS und HDO 300 R F IS 1217_01 Sluitvolgorderegeling voor het gebruik op brand-/rookwerende deuren Fabrikant GEZE GmbH, Reinhold-Vöster-Str. 21-29, 71229 Leonberg, Germany Prestatie beoordelingssysteem … Gevaarlijke substanties voldoet aan - EN 1158:1997/A1:2002/AC:2006 paragraaf ZA.3 Zelfsluitend De prestatie van het bovenstaande product komt overeen met de verklaarde prestatie/prestaties. Voor het opstellen van de declaration of performance in overeenstemming met de verordening (EU) nr. 305/2011 is alleen bovengenoemde fabrikant verantwoordelijk. Ondertekend voor de fabrikant en namens de fabrikant Leonberg,
(PDF | 13 MB)
Leistungserklärung (DoP): Schließfolgeregelung IS für den Drehflügelantrieb Slimdrive EMD-F-IS und Slimdrive EMD-F/R-IS
… performances FRA Copie du document original 1sur1 N° de la déclaration de performance 1218_01 Code d’identification du type de produit Utilisation conforme aux dispositions Schließfolgeregelung IS für den Drehflügelantrieb Slimdrive EMD-F-IS und Slimdrive EMD-F/R-IS 1218_01 Sélecteur de fermeture pour utilisation sur porte coupe-feu et pare-flammes Fabricant GEZE GmbH, Reinhold-Vöster-Str. 21-29, 71229 Leonberg, Germany Système pour l'évaluation des performances … Norme harmonisée EN 1158:1997/A1:2002/AC:2006 Autorité notifiante MPA Stuttgart, Pfaffenwaldring 32, 70569 Stuttgart, Germany, Notified Body ID = 0672 Performances déclarées Principales caractéristiques constatées conforme à - EN 1158:1997/A1:2002/AC:2006 sections … Fermeture automatique Fonctionnement continu de la fermeture automatique Substances dangereuses conforme à - EN 1158:1997/A1:2002/AC:2006 section ZA.3 La puissance du produit correspond à la performance définie/aux performances définies. Le fabricant mentionné ci-dessus est seul responsable pour l’établissement de la déclaration de performance conformément à la directive (UE) n° 305/2011. Signé pour et au nom du fabricant Leonberg, … .2024 Signature voir document d'origine Sandra Alber (Chief Officer Legal & Finance) Tomislav Jagar (Chief Officer Product Strategy & Sales) declaration of performance GBR Copy of the original document 1of1 No. of the declaration of performance 1218_01 Product type identification code Intended use Schließfolgeregelung IS für den Drehflügelantrieb Slimdrive EMD-F-IS und Slimdrive EMD-F/R-IS 1218_01 Closing sequence controller for use on fire and smoke protection doors Manufacturer GEZE GmbH, Reinhold-Vöster-Str. 21-29, 71229 Leonberg, Germany System/s of AVCP … Harmonised standard EN 1158:1997/A1:2002/AC:2006 Notified body MPA Stuttgart, Pfaffenwaldring 32, 70569 Stuttgart, Germany, Notified Body ID = 0672 Declared performance Permanent function of self-closing Essential Characteristics fulfilled - EN 1158:1997/A1:2002/AC:2006 sections … Hazardous substances fulfilled - EN 1158:1997/A1:2002/AC:2006 section ZA.3 Self-closing The performance of the above product is in conformity with the declared performance(s). The manufacturer above is solely responsible for preparing the declaration of performance in accordance with Regulation (EU) No. 305/2011. Signed for and on behalf of the manufacturer Leonberg, … .2024 Síniú féach an doiciméad bunaidh Sandra Alber (Chief Officer Legal & Finance) Tomislav Jagar (Chief Officer Product Strategy & Sales) Dichiarazione di performance ITA Copia del documento originale 1di1 N. della dichiarazione di performance 1218_01 Codice di codifica del tipo di prodotto Destinazione d’uso Schließfolgeregelung IS für den Drehflügelantrieb Slimdrive EMD-F-IS und Slimdrive EMD-F/R-IS 1218_01 Regolatore della sequenza di chiusura per l'utilizzo su porte tagliafuoco e tagliafumo Produttore GEZE GmbH, Reinhold-Vöster-Str. 21-29, 71229 Leonberg, Germany Sistema per valutare la potenzialità … Sostanze pericolose soddisfatta - EN 1158:1997/A1:2002/AC:2006 Paragrafo ZA.3 A chiusura automatica La performance di questo prodotto soddisfa le prestazioni dichiarate. Per la redazione di una dichiarazione di performance conforme al regolamento (UE) n. 305/2011, unico responsabile è il produttore sopra menzionato. Firmato per il produttore e a nome del produttore Leonberg, … .2024 Għall-firma, ara d-dokument oriġinali Sandra Alber (Chief Officer Legal & Finance) Tomislav Jagar (Chief Officer Product Strategy & Sales) Prestatieverklaring NLD Kopie van origineel document 1van1 Nr. van de declaration of performance 1218_01 Identificatiecode van het producttype Beoogd gebruik Schließfolgeregelung IS für den Drehflügelantrieb Slimdrive EMD-F-IS und Slimdrive EMD-F/R-IS 1218_01 Sluitvolgorderegeling voor het gebruik op brand-/rookwerende deuren Fabrikant GEZE GmbH, Reinhold-Vöster-Str. 21-29, 71229 Leonberg, Germany Prestatie beoordelingssysteem … Gevaarlijke substanties voldoet aan - EN 1158:1997/A1:2002/AC:2006 paragraaf ZA.3 Zelfsluitend De prestatie van het bovenstaande product komt overeen met de verklaarde prestatie/prestaties. Voor het opstellen van de declaration of performance in overeenstemming met de verordening (EU) nr. 305/2011 is alleen bovengenoemde fabrikant verantwoordelijk. Ondertekend voor de fabrikant en namens de fabrikant Leonberg,
(PDF | 13 MB)
Rauchmelder GC 162 RWA
… of the emergency power supply control unit MBZ300, THZ, THZ Comfort: The maximum number of smoke or heat detectors per line depends on the control unit. + - … white, RAL 9010 110 mm x 54 mm 130 g EN 54-7: 2018 Scatter light, adaption of the alarm threshold, retentive Use The GC 162 RWA is a ceiling-mounted smoke detector for use in GEZE RWA systems. Smoke detectors detect smoke. They work using the light scatter principle. A light transmitter and a light receiver are arranged in the measuring chamber in such a way that no light reaches the receiver module in the normal case. If there are suspended particles (smoke) in the measuring chamber, these scatter part of the light onto the receiver module, which converts this into an electric signal. In other words, a smoke detector not only detects smoke but all other suspended particles and responds sensitively to soiling. These smoke detectors work according to the principle of current increase. In the event of an alarm, the current consumption of the detector changes. Protection of the smoke detector from soiling à Do not remove the dust protection cap from the smoke detector until commissioning is about to take place. à After the smoke detector has been installed and the dust protection removed, make sure no dust gets into the measuring chamber. This leads to increased soiling and can significantly shorten the service life of the smoke detector. à The measuring chamber of a smoke detector must not be opened. Terminating resistor for line monitoring There must be a 10 kΩ terminating resistor built into the base GC 160 B of the last smoke detector in a line. The resistor is included with the control unit. … First smoke detector Last smoke detector Insert the terminal resistor in the last detector Terminal strip GEZE emergency power supply control unit (see respective wiring diagram) Smoke detector connection Test Use test gas from a recognised manufacturer for testing in accordance with the manufacturer’s instructions. à The red LED on the detector must change to the alarm state within 40 seconds. à An alarm must be activated on the control unit. à After the test has been completed, reset the alarm on the control unit and carry out a detector line reset. GEZE GmbH hereby declares that this product comply with directives 2014/30/EU and 2011/65/EU. The complete text of the EU Declaration of Conformity, and the Declaration of Performance, is available at the following Internet address: www.geze.com.
(PDF | 5 MB)
Produktverifizierung LEED Oberlichtöffner OL 90 N
… Declaration - LEED® 2009 New Construction And Major Renovations NC & CS Manufacturer GEZE GmbH Product Name Fanlight opener OL 90 N Product Rating ▪ The product fulfills the requirements for paints and coatings and contribute to achieve one LEED credit within IEQ Credit … special colour. # # # About LEED & Products - www.usgbc.org This declaration helps to assess products easily according the certification system LEED® 2009 New Construction and Major Renovations NC & CS (excluded SCHOOLS). Products are not reviewed or certified by LEED. LEED credit requirements cover the performance of materials in aggregate, not the performance of individual products or brands. For more information about LEED visit www.usgbc.org/leed. The project team or the manufacturer is responsible to declare the compliance with the project requirements to achieve LEED points. Below you find an explanation of the symbols. Detailed information are on the next pages. Credit requirements fulfilled - the credit point can be achieved Credit is not applicable to this product 22% X% of the product comply with the credit requirement — Required data not specified - for required data contact manufacturer Credit requirements are not fulfilled Notice: This declaration is a product of HOINKA GmbH. This data sheet is published in the online database greenbuildingproducts.eu. The distribution by third parties is prohibited. This declaration is no official certificate in terms of LEED. The contents are based on manufacturer specifications. In spite of a diligent treatment of all information HOINKA GmbH cannot guarantee the actuality or correctness of the published data. The interpretation of the LEED criteria requirements can differ and depend on the project and the scope of application. In spite of a diligent treatment of all information HOINKA GmbH cannot guarantee the correctness of evaluation in terms of the LEED requirements. The user of this declaration, the consumer of the product and the consultant/planner, who is advising this product in any construction projects, is responsible by himself to proof all data published in this document and to verify the permissibility for the designated application. The content of this data sheet does not manifest any legal relationship. With the publication of a new edition, this declaration can no longer be considered to be valid. The latest version is available in the internet. HOINKA GmbH ▪ greenbuildingproducts.eu ▪ Lembergweg 7/1 ▪ 71067 Sindelfingen ▪ Tel. +49 7031 7659-441 ▪ Fax +49 7031 7659-443 ▪ www.greenbuildingproducts.eu ▪ contact@greenbuildingproducts.eu ▪ Geschäftsführer: Dipl.-Ing. Thomas Hoinka N/A If the location of 'Harvesting & Extraction' and 'Manufacturing' is within a radius of 500 miles of the project the subproduct contributes to the credit. — … Oberlichtöffner OL 90 GEZE GmbH N A10 A9 A8 A7 A6 Notice: This declaration is a product of HOINKA GmbH. This data sheet is published in the online database greenbuildingproducts.eu. The distribution by third parties is prohibited. This declaration is no official certificate in terms of LEED. The contents are based on manufacturer specifications. In spite of a diligent treatment of all information HOINKA GmbH cannot guarantee the actuality or correctness of the published data. The interpretation of the LEED criteria requirements can differ and depend on the project and the scope of application. In spite of a diligent treatment of all information HOINKA GmbH cannot guarantee the correctness of evaluation in terms of the LEED requirements. The user of this declaration, the consumer of the product and the consultant/planner, who is advising this product in any construction projects, is responsible by himself to proof all data published in this document and to verify the permissibility for the designated application. The content of this data sheet does not manifest any legal relationship. With the publication of a new edition, this declaration can no longer be considered to be valid. The latest version is available in the internet. HOINKA GmbH ▪ greenbuildingproducts.eu ▪ Lembergweg 7/1 ▪ 71067 Sindelfingen ▪ Tel. +49 7031 7659-441 ▪ Fax +49 7031 7659-443 ▪ www.greenbuildingproducts.eu ▪ contact@greenbuildingproducts.eu ▪ Geschäftsführer: Dipl.-Ing. Thomas Hoinka *All values are based on the unit:1 element **LEED default recycled content for steel … .2012 Produkt Declaration - LEED® 2009 New Construction And Major Renovations NC & CS Reference: L09-1424 / … .2012 Produkt Declaration - LEED® 2009 New Construction And Major Renovations NC & CS Manufacturer GEZE GmbH Product Name Fanlight opener OL 90 N IEQ Credit … : Low Emitting Materials: Adhesives and Sealants (1 Point) Intent Reduce the quantity of indoor air contaminants that are odorous, irritating and/or harmful to the comfort and well-being of installers and occupants caused by adhesives and sealants applied on site. Requirement All adhesive, sealants and sealant primers used on the interior of the building (defined as inside of the weatherproofing system and applied on-site) must comply shall comply with the VOC content limits of the following: ▪ SCAQMD Rule #1168 (effective date of July 1, 2005 and rule amendment date of January 7, 2005), ▪ Aerosol Adhesives must comply with Green Seal Standard for Commercial Adhesives GS-36 requirements in effect on October 19, 2000. IEQ Credit … : Low Emitting Materials: Paints and Coatings (1 Point) Intent Reduce the quantity of indoor air contaminants that are odorous, irritating and/or harmful to the comfort and well-being of installers and occupants caused by paints and coatings applied on site. Requirement Paints and coatings used on the interior of the building (defined as inside of the weatherproofing system and applied on-site) must comply with the VOC content limits of the following: ▪ Green Seal Standard GS-11, Paints Edition, May 20, 1993, ▪ Green Seal Standard GC-03, Anti-Corrosive Paints, Second Edition, January 7, 1997, and ▪ South Coast Air Quality Management District (SCAQMD) Rule 1113, Architectural Coatings, rules in effect on January 1, 2004. Detailed Rating No Product Name Manufacturer Related Credit Product Type A1 Steel galvanized GEZE GmbH N/A N/A N/A N/A The product is no adhesive, sealant, paint or coating. A2 Aluminium GEZE GmbH N/A N/A N/A N/A The product is no adhesive, sealant, paint or coating. A3 Zinc die-cast GEZE GmbH N/A N/A N/A N/A The product is no adhesive, sealant, paint or coating. A4 Plastics GEZE GmbH N/A N/A N/A N/A The product is no adhesive, sealant, paint or coating. A5 Powder coating GEZE GmbH 50g/l 0g/l The product fulfills the requirements for paints & coatings. IEQ Credit Flats … (SCAQMD Rule 1113) VOC-Content Allowable Product Contribution of Product Notice: This declaration is a product of HOINKA GmbH. This data sheet is published in the online database greenbuildingproducts.eu. The distribution by third parties is prohibited. This declaration is no official certificate in terms of LEED. The contents are based on manufacturer specifications. In spite of a diligent treatment of all information HOINKA GmbH cannot guarantee the actuality or correctness of the published data. The interpretation of the LEED criteria requirements can differ and depend on the project and the scope of application. In spite of a diligent treatment of all information HOINKA GmbH cannot guarantee the correctness of evaluation in terms of the LEED requirements. The user of this declaration, the consumer of the product and the consultant/planner, who is advising this product in any construction projects, is responsible by himself to proof all data published in this document and to verify the permissibility for the designated application. The content of this data sheet does not manifest any legal relationship. With the publication of a new edition, this declaration can no longer be considered to be valid. The latest version is available in the internet. HOINKA GmbH ▪ greenbuildingproducts.eu ▪ Lembergweg 7/1 ▪ 71067 Sindelfingen ▪ Tel. +49 7031 7659-441 ▪ Fax +49 7031 7659-443 ▪ www.greenbuildingproducts.eu ▪ contact@greenbuildingproducts.eu ▪ Geschäftsführer: Dipl.-Ing. Thomas Hoinka Reference: L09-1424 / … .2012 Produkt Declaration - LEED® 2009 New Construction And Major Renovations NC & CS Manufacturer GEZE GmbH Product Name Fanlight opener OL 90 N MR Credit 4: Recycled Content (1-2 Points) Intent To increase demand for building products that incorporate recycled content materials, thereby reducing impacts resulting from extraction and processing of virgin materials. Requirement Use materials with recycled content* such that the sum of post-consumer** recycled content plus one-half of the pre-consumer*** content constitutes at least 10%/20% (based on cost) of the total value of the materials in the project. The minimum percentage materials recycled for each point threshold is as follows: ▪ 10% Recycled Content -> … Points. * Recycled content is defined in accordance with the International Organization of Standards document, ISO 14021 — Environmental labels and declarations — Self-declared environmental claims (Type II environmental labeling). ** Postconsumer material is defined as waste material generated by households or by commercial, industrial and institutional facilities in their role as end-users of the product, which can no longer be used for its intended purpose. *** Preconsumer material is defined as material diverted from the waste stream during the manufacturing process. Reutilization of materials (i.e., rework, regrind or scrap generated in a process and capable of being reclaimed within the same process that generated it) is excluded. Detailed Rating No Product Name Manufacturer Recycled Content PostPreConsumer Consumer A1 Steel galvanized GEZE GmbH 25%** 0% Accountable recycled content according to LEED is 25% (1 x Post-Consumer + … x Pre-Consumer). **LEED default recycled content for steel 25% A2 Aluminium GEZE GmbH Not specified Not specified No recycled content specified. — A3 Zinc die-cast GEZE GmbH Not specified Not specified No recycled content specified. — A4 Plastics GEZE GmbH Not specified Not specified No recycled content specified. — A5 Powder coating GEZE GmbH Not specified Not specified No recycled content specified. — Contribution of Product Notice: This declaration is a product of HOINKA GmbH. This data sheet is published in the online database greenbuildingproducts.eu. The distribution by third parties is prohibited. This declaration is no official certificate in terms of LEED. The contents are based on manufacturer specifications. In spite of a diligent treatment of all information HOINKA GmbH cannot guarantee the actuality or correctness of the published data. The interpretation of the LEED criteria requirements can differ and depend on the project and the scope of application. In spite of a diligent treatment of all information HOINKA GmbH cannot guarantee the correctness of evaluation in terms of the LEED requirements. The user of this declaration, the consumer of the product and the consultant/planner, who is advising this product in any construction projects, is responsible by himself to proof all data published in this document and to verify the permissibility for the designated application. The content of this data sheet does not manifest any legal relationship. With the publication of a new edition, this declaration can no longer be considered to be valid. The latest version is available in the internet. HOINKA GmbH ▪ greenbuildingproducts.eu ▪ Lembergweg 7/1 ▪ 71067 Sindelfingen ▪ Tel. +49 7031 7659-441 ▪ Fax +49 7031 7659-443 ▪ www.greenbuildingproducts.eu ▪ contact@greenbuildingproducts.eu ▪ Geschäftsführer: Dipl.-Ing. Thomas Hoinka Reference: L09-1424 / … .2012 Produkt Declaration - LEED® 2009 New Construction And Major Renovations NC & CS Manufacturer GEZE GmbH Product Name Fanlight opener OL 90 N MR Credit 5: Regional Materials (1-2 Points) Intent To increase demand for building materials and products that are extracted and manufactured within the region, thereby supporting the use of indigenous resources and reducing the environmental impacts resulting from transportation. Requirement Use building materials or products that have been extracted, harvested or recovered, as well as manufactured, within 500 miles of the project site for a minimum of 10% or 20%, based on cost, of the total materials value. If only a fraction of a product or material is extracted, harvested, or recovered and manufactured locally, then only that percentage (by weight) must contribute to the regional value. The minimum percentage regional materials for each point threshold is as follows: ▪ 10% Regional Materials -> … Points. Detailed Rating No Manufacturer Location Harvesting/ Extraction Location Manufacturing A1 Steel galvanized GEZE GmbH Not specified Not specified A2 Aluminium GEZE GmbH Not specified Not specified A3 Zinc die-cast GEZE GmbH Not specified Not specified A4 Plastics GEZE GmbH Not specified Not specified A5 Powder coating GEZE GmbH Not specified Not specified Product Name Notice: This declaration is a product of HOINKA GmbH. This data sheet is published in the online database greenbuildingproducts.eu. The distribution by third parties is prohibited. This declaration is no official certificate in terms of LEED. The contents are based on manufacturer specifications. In spite of a diligent treatment of all information HOINKA GmbH cannot guarantee the actuality or correctness of the published data. The interpretation of the LEED criteria requirements can differ and depend on the project and the scope of application. In spite of a diligent treatment of all information HOINKA GmbH cannot guarantee the correctness of evaluation in terms of the LEED requirements. The user of this declaration, the consumer of the product and the consultant/planner, who is advising this product in any construction projects, is responsible by himself to proof all data published in this document and to verify the permissibility for the designated application. The content of this data sheet does not manifest any legal relationship. With the publication of a new edition, this declaration can no longer be considered to be valid. The latest version is available in the internet. HOINKA GmbH ▪ greenbuildingproducts.eu ▪ Lembergweg 7/1 ▪ 71067 Sindelfingen ▪ Tel. +49 7031 7659-441 ▪ Fax +49 7031 7659-443 ▪ www.greenbuildingproducts.eu ▪ contact@greenbuildingproducts.eu ▪ Geschäftsführer: Dipl.-Ing. Thomas Hoinka
(PDF | 189 KB)