Opening/locking system

RWA 105 NT Opening and locking system for post-rail constructions

  • System solution with profile-mounted E 250 NT spindle drive and a console set with locking device
  • Double mechanical locking at the main closing edge by the spindle drive
  • Very few space needed on the frame
  • Large opening width with short spindle stroke in less than 60 seconds
  • Synchro operation possible with two drives for wide window leaves
  • IQ windowdrive - intelligent drive control
Show more
  • SHEV tested according to EN 12101-2
Contact us

Opening and locking system for post-rail constructions

Application Areas

  • Natural ventilation, smoke and heat extraction system, natural smoke and heat extraction device (SHEV)
  • Opening and locking of inward opening windows with bottom-, top- and side-hung leaves in post-rail façades
  • Installation on wooden, PVC or metal windows

Product specifications

RWA 105 NT
Space required (min.) Cover frame: 18 mm, leaf: 38 mm, post-rail height max. 125 mm
Permissible dimensions of primary closing edge Solo for timber and aluminium frames depending on stroke
Permissible dimensions of primary closing edge Solo for plastic frames depending on stroke
Permissible dimensions of primary closing edge Syncro for timber and aluminium frames depending on stroke
Permissible dimensions of primary closing edge Syncro for plastic frames depending on stroke
Leaf heights for Solo and Syncro depending on stroke
Possible stroke heights 100 mm, 150 mm, 230 mm
Tensile force (max.) 750 N
Force of pressure (max.) 750 N
Panel weight (max.) 30 kg/m²
Operating voltage 24 V (+30 % to -20 %)
Current consumption 1 A
Current consumption Ventilation (24 V): 0.9 A, RWA (18 V): 1.0 A
Power consumption (max.) 20 W
Residual ripple (max.) 30 %
Connection cable length 2 m
Cable dimensions 4 x 0.75 mm²
Temperature range -5 °C - 75 °C
IP rating / protection rating IP65 / III
Tandem function Yes
Syncro function No
Adjustable opening speed (ventilation) No
Additional locking available No
Locking and additional angle bracket Yes
End position cut-off extended Internal path sensor
End position cut-off retracted Internal path sensor
Overload cut-off Yes
SHEV tested Yes
Bottom-hung window INWARD-opening frame installation No
Bottom-hung window INWARD-opening leaf installation Yes
Bottom-hung window OUTWARD-opening frame installation No
Bottom-hung window OUTWARD-opening leaf installation No
Side-hung window INWARD-opening frame installation No
Side-hung window INWARD-opening door leaf installation Yes
Side-hung window OUTWARD-opening frame installation No
Side-hung window OUTWARD-opening door leaf installation No
Top-hung window INWARD-opening frame installation No
Top-hung window INWARD-opening leaf installation Yes
Top-hung window OUTWARD-opening frame installation No
Top-hung window OUTWARD-opening leaf installation No
OUTWARD-opening roof window No
Projected top-hung window OUTWARD-opening frame installation No
Parallel-opening window OUTWARD-opening frame installation No

Contact

We would be happy to assist you +49-7152-203-0 Hotline for architects +49-7152-203-112 (7:30 a.m. - 5:00 p.m.) Service Hotline +49-1802-923392 (0.06 € / Calling from landline, mobile telephony max. 0.42 €)