Opening/locking system

RWA 100 NT Opening and locking system for inward opening bottom-hung, top-hung and side-hung leaves

  • System solution with profile-mounted E 250 NT spindle drive and a console set with locking device
  • Mechanical locking at the main closing edge by the spindle drive
  • Large opening width with short spindle stroke in less than 60 seconds
  • Synchro operation possible with two drives for wide window leaves
  • IQ windowdrive - intelligent drive control
  • SHEV tested according to EN 12101-2
Contact us

Opening and locking system for inward opening bottom-hung, top-hung and side-hung leaves

Application Areas

  • Opening and locking of inward opening windows with bottom-hung, top-hung and side-hung leaves
  • Natural ventilation, smoke and heat extraction system, natural smoke and heat extraction device (SHEV)
  • Can be used in the exhaust air and air intake
  • Installation on wooden, PVC or metal windows

Product specifications

RWA 100 NT
Space required (min.) Locking side: 32 mm, motor side: 48 mm
Permissible dimensions of primary closing edge Solo for timber and aluminium frames 360 - 1200 mm
Permissible dimensions of primary closing edge Solo for plastic frames 360 - 800 mm
Permissible dimensions of primary closing edge Syncro for timber and aluminium frames 800 - 2400 mm
Permissible dimensions of primary closing edge Syncro for plastic frames 800 - 1.600 mm
Leaf heights for Solo and Syncro 520 - 1700 mm
Possible stroke heights 100 mm, 150 mm, 200 mm, 300 mm
Tensile force (max.) 750 N
Force of pressure (max.) 750 N
Panel weight (max.) 30 kg/m²
Operating voltage 24 V (+30 % to -20 %)
Current consumption 1 A
Current consumption Ventilation (24 V): 0.9 A, RWA (18 V): 1.0 A
Power consumption 20 W
Residual ripple (max.) 30 %
Connection cable length 2 m
Cable dimensions 4 x 0.75 mm²
Temperature range -5 °C - 75 °C
IP rating / protection rating IP65 / III
Tandem function Yes
Syncro function No
Adjustable opening speed (ventilation) No
Additional locking available No
Locking and additional angle bracket Yes
End position cut-off extended Internal path sensor
End position cut-off retracted Internal path sensor
Overload cut-off Yes
SHEV tested Yes
Bottom-hung window INWARD-opening frame installation Yes
Bottom-hung window INWARD-opening leaf installation No
Bottom-hung window OUTWARD-opening frame installation No
Bottom-hung window OUTWARD-opening leaf installation No
Side-hung window INWARD-opening frame installation Yes
Side-hung window INWARD-opening door leaf installation No
Side-hung window OUTWARD-opening frame installation No
Side-hung window OUTWARD-opening door leaf installation No
Top-hung window INWARD-opening frame installation Yes
Top-hung window INWARD-opening leaf installation No
Top-hung window OUTWARD-opening frame installation No
Top-hung window OUTWARD-opening leaf installation No
OUTWARD-opening roof window No
Projected top-hung window OUTWARD-opening frame installation No
Parallel-opening window OUTWARD-opening frame installation No

Contact

We would be happy to assist you +49-7152-203-0 Hotline for architects +49-7152-203-112 (7:30 a.m. - 5:00 p.m.) Service Hotline +49-1802-923392 (0.06 € / Calling from landline, mobile telephony max. 0.42 €)