Hold-open system

Slimdrive EMD F/R Electromechanical swing door drive for single leaf fire and smoke protection doors with integrated smoke switch

  • Closing force with variable adjustment EN3-6
  • Integrated smoke switch control unit, whose signal closes the door automatically in the event of a fire
  • Opening and closing speed can be individually adjusted
  • Low-energy function opens and closes the door with reduced speed, fulfilling the highest safety requirements
  • Vestibule function controls the opening and closing of two consecutive doors (interlocking door system)
  • Obstacle detection detects obstacles through contact and stops the opening or closing process
Show more
  • Automatic reversing detects an obstacle and returns to the opening position
  • Push & Go function triggers the automatic drive components following light manual pressure on the door leaf
  • Drive can be used with roller guide rail or link arm
  • Servo function for motorized support when manually opening the door
Contact us

Electromechanical swing door drive for single leaf fire and smoke protection doors with integrated smoke switch

Application Areas

  • Fire and smoke protection doors
  • Transom installation hinge and opposite hinge side
  • Right and left single leaf single-action doors
  • Single-action doors up to 1400 mm leaf width or 230 kg weight
  • Minimum leaf width 750 mm
  • Interior and exterior doors with high access frequency
  • Hold-open systems with integrated hold-open function – country-specific specifications must be observed

Product specifications

Slimdrive EMD F/R
Leaf weight (max.) 230 kg
Leaf width (min.-max.) 850 mm - 1400 mm
Reveal depth (max.) 300 mm
Door overlap (max.) 50 mm
Drive type Electromechanical
Opening angle (max.) 120 °
DIN left Yes
DIN right Yes
Installation in the door leaf No
Installation in the door frame No
Transom installation opposite hinge side with link arm Yes
Transom installation opposite hinge side with roller guide rail No
Transom installation hinge side with roller guide rail Yes
Door leaf installation opposite hinge side with roller guide rail No
Door leaf installation hinge side with roller guide rail No
Door leaf installation hinge side with link arm No
Mechanical latching action Yes
Electrical latching action Yes
Electrical closing sequence control No
Mechanical closing sequence control No
Disconnection from mains Cable plug connection
Activation delay (max.) 20 s
Type of installation 230 V
Frequency of supply voltage 50 Hz
Power rating 230 W
Power supply for external consumers (24 V DC) 1200 mA
Temperature range -15 °C - 50 °C
Air humidity non-condensing (max.) 95 %
Temperature range IP20
Modes of operation Automatic, Permanently open, Night, Off, Shop closing
Automatic function Yes
Low-energy function Yes
Smart swing No
Servo function Yes
Inverse function (opening by spring force) No
Obstacle detection Yes
Automatic reversing Yes
Push & Go adjustable
Operation Programme switch integrated in the drive, Programme switch DPS, Programme switch MPS
Parameter setting ST 220 service terminal, Programme switch DPS, GEZEconnects (PC + Bluetooth)
CAN interface Optional
Approvals EN 16005, DIN 18650, DIN 18263-4, General building approval from DIBt as a hold-open system
Suitability for fire protection doors Yes
Integrated smoke switch Yes

Downloads

Variants & Accessories

Contact

We would be happy to assist you +49-7152-203-0 Hotline for architects +49-7152-203-112 (7:30 a.m. - 5:00 p.m.) Service Hotline +49-1802-923392 (0.06 € / Calling from landline, mobile telephony max. 0.42 €)